Tag: swimming

How to Get Rid of Algae in Your Pool

No Comments
pool guy

How To Deal With Pool Algae Problems

Having a pool in your yard can provide you, your family and friends with the opportunity to make any gathering even more fun – especially during those lazy summer days. But a pool can quickly stop being a pleasure and become a pain when algae start to become a problem.

If you are faced with an algae issue then what are the steps you need to take to restore the water quality of the pool?

Firstly it’s important to realize that there are a number of different types of algae, green, black and yellow being the most common – however homeowners are usually faced with green algae – that is the organism most often that ruins your swimming experience and relaxation. It can quickly turn your pool into something that resembles a swamp.

The presence of Green Algae is usually a result of poor filtration and inadequate treatment with chemicals such as chlorine. Another reason for the presence of Green Algae is that your pool pump is not providing for proper water circulation. The first step in finding the root of the problem is to make sure that the pump is working at full capacity. Also, make sure that the filter system is operating correctly.

If the problem persists, it’s time to step up your chlorination game – in other words; it’s time for a ‘Shock’ treatment.

The amount of chlorine that you will need to shock the algae out of existence is dependent on the size of your pool. A good rule of thumb is that 1 pound of chlorine should be used for every 10,000 gallons of water. But there’s another factor.

That sort of shock treatment is excellent for algae which have not progressed to a darker green. If you can see the bottom of the pool a stage, one shock treatment should sort the problem out.

Once the problem has gotten worse, you may have to up the chlorine game and start multiplying the amount of chlorine you are going to be using for the shock treatment. In fact for larger pools of around 40,000 gallons, if the problem has gotten this bad, you may need to triple the amount of chlorine that you are using.

There’s another way to treat problem algae – and that is through the use of a ‘flocculant.’ This is a chemical that causes algae to adhere to it and then sink to the bottom of the pool where it can be dealt with by the automated pool cleaning device that keeps the surfaces clean – or by manual vacuum. You will have to allow the chemical to do its job. Set your filter to recirculate to ensure that the chemical is properly mixed into the water.

Wait 24 hours and then begin the vacuum process after brushing off stairs and making sure that your pool cleaning appliance can reach the surfaces where the algae have settled.

Some pool experts recommend shocking once the vacuum process has been completed.

Following these measures will return your pool to a condition where entertaining is a pleasure for all involved. Make sure that your swimming pool experience is excellent – deal with algae as soon as it appears.

How To Clear Up And Clean A Green Swimming Pool

No Comments
swimming pool

Cleaning a Green Pool and Preventing the Formation of Algae

A swimming pool in your backyard is a fun thing to have that can significantly raise your status among your neighbors. It is not too expensive to construct and gives you the luxury of cooling off with a swim any time of the day and year-round use if you can heat the water for use during winter. It does, however, require you to pay sufficient attention to the cleaning and maintaining of the pool.swimming pool

One problem that can occur with pools where the water has not been adequately chlorinated is that the pool water can start showing a greenish hue. The lack of chlorine allows algae and other microorganisms to build up so that all the water turns green. There is no better way to clean a green pool than to use chemicals that can rid your pool of algae and have the green water rolling clear once again, and be just as inviting for a swim. At the same time, you need to check up on the effectiveness of your filtration system, that is a necessity for any swimming pool. A combination of correct filtering and chemicals will clean your pool water. It can also help to periodically check the chemical balance of the water in the swimming pool. Water that is alkaline will be high on pH and low on chlorine, and this water will always display a green tinge. Pool test strips are available in stores that give you various supplies for the pool, and you need to be aware of how these should be used, and what the multiple results indicate.

Algae that lead to a green pool can flourish due to any number of reasons, though the main reason always is poor maintenance, circulation, filtration, and neglect of regular testing that can indicate the health of the water. There are many types of algae and all of them from being prevented from being part of your pool water. Foremost, you need to see that the water in the pool always has the right levels of the required chemicals, which you must acquaint yourself with when you first install the pool. It can also help if you regularly clean the pool of leaves and other debris that does accumulate on lakes that are exposed to the environment. Walls and floors will turn slimy as a first indication of the likely build up of algae, and it can help if you regularly brush the surfaces with stiff brushes and let the debris get filtered out through the filtration system. It can lead to filters getting clogged, and you will need to clean them at regular intervals. It can help if the pumps keep circulating water for a fair bit of time after you have finished using the pool.

You can get various algaecides that can act against the formation of this green color of the water. Be vigilant and start taking action as soon as you notice the water turning cloudy, as this is a sign of a chemical imbalance that can turn your water green.